Aviationweb déjà vu                       Luchtvaart déjà vu aeroplane gallery

D-ENKA

Aquila A211G
D-EBFL  
D-EBFL  
Bolkow Bo.209C Monsun
D-EAIG  D-EAIR
D-EAIG D-EAIR
Cirrus Design SR20
D-EPUC N200EU
D-EPUC N200EU
N207CD SE-LUC
Cirrus Design SR22
N10CD
N10CD N1624C
Tecnam P2002-JF
PH-TCM PH-VHC
PH-TCM PH-VHC
D-ENKA Aquila A 210 c/n AT01-232 - Verkehrsfliegerschule TFC Käufer - Flugplatz Leer-Papenburg in Germany - 26 February 2019 Flugplatz Leer-Papenburg (EDWF)

The Aquila A210 is a side by side two seat; low-wing; composite design; single engined very light aircraft (VLA) fitted with a fixed tricycle landing gear with steerable nose wheel. However marketed as the A 210, its official engineering and certification name is Aquila AT-01. Development of the A 210 started in 1995 in Germany by Peter Grundhoff, Alfred Schmiderer and Markus Wagner, who before worked on aircraft like the Stemme S10 and the FFT Eurotrainer 2000. In 1996, AQUILA Aviation Technische Entwicklungen GmbH was founded and the next year was started with the establishment of a production facility in Schönhagen. Following successful structural load tests at the Technical University of Berlin and a swing test, the aircraft was presented to the public at the 1999 AERO aerospace fair in Friedrichshafen. On 5 March 2000, the prototype AT-01 D-EQUI took off from airfield Schönhagen for its first flight. Flight testing was completed in March 2001, and the type certification of the JAR-VLA aircraft was completed on 21 September 2001. Series production started in 2002, with the 200th Aquila delivered on 17 January 2017. The AT-01 is entirely built from carbon and glass fibre reinforced composite plastics. Carbon reinforced composite plastic is used for the more highly stressed members, spars, frames and stringers, glass fibre reinforced plastic for shells and control surfaces, the latter with glassfibre reinforced composite/polyurethane sandwich construction. The low wing has straight tapered inboard sections with increasing sweep outboard and winglets at the tips on production examples. It has a laminar flow section and 4.5° of dihedral. The ailerons are balanced and the inboard single slotted fowler flaps have two positions. The AT-01 is powered by a Rotax 912 flat four engine driving a two blade propeller. The cabin has uninterrupted transparencies fore and aft, with a slender fuselage behind. The canopy is forward hinged. The tailplane is set just above the fuselage and the fin is swept. A small ventral fin doubles as a tail bumper. The AT-01 has a fixed tricycle undercarriage. Its mainwheels are fitted with hydraulic brakes and mounted on spring steel legs from the fuselage. The nosewheel has rubber suspension and is steerable; speed fairings are fitted on all wheels. In 2011, a special version called SXT for flight schools was introduced. In 2013, Aquila introduced the modernized and face-lifted version of its A210 airplane called A211. The A211 is used both for training and for travel. The A210/211 is equally at home on grass strips and tarmac. A further development is the Aquila A212, based on the A211 airframe but powered by the stronger Rotax 914 F3 turbo-charged engine.
"Aquila" changed several times of owner / name since the company started in 1996 as AQUILA Aviation Technische Entwicklungen GmbH: in 2008 it became AQUILA Aviation by Excellence AG; in 2011 Aquila Aviation by Excellence GmbH; in 2013 AQUILA Aviation GmbH and in 2016 AQUILA Aviation International GmbH all as before based at Schönhagen Flugplatz in Trebbin, Germany.
The ICAO Aircraft Type Designator for the Aquila A 210 is A210

The 2011-built Aquila A 210 s/n AT01-232 is registered D-ENKA in Germany and operated by Verkehrsfliegerschule TFC Käufer, Essen.
On 26 February 2019, Aquila A 210 D-ENKA was seen at Flugplatz Leer-Papenburg in Germany during a training flight.

page last updated: 03-03-2019
Copyright © Jack Wolbrink, Emmen, the Netherlands
 

  aeroplanes index   helicopters index   EC120 - H120 productionlist   Micro Light Aeroplanes   European Airfields